【Product Introduction】

Bridge waterproof coating is a water-based coating based on high-quality petroleum asphalt, which is emulsified and modified with a variety of special polymer materials

It can effectively prevent the penetration of water, and has a strong adhesion with concrete, masonry, mortar plastering, etc., and is combined with the substrate

All in one piece to achieve a good waterproof effect.

【Scope of application】

The product is dedicated to road and bridge waterproofing projects, and is also suitable for building roof, underground, and tunnel waterproofing.

【Product Advantages】

The waterproof layer is fast film formation, good waterproof effect and low price.

The construction process is simple, it can be painted manually or mechanically, and the same effect can be achieved by both construction methods

3.

Excellent low temperature resistance and impermeability, abrasion resistance, acid resistance and alkali resistance

4.

No solvent is added during construction, which is safe and environmentally friendly, and the curing is rapid, which fully meets the requirements of the construction schedule.

Base preparation)

Cleaning the base layer - treatment of key parts - the first waterproofing layer - the second waterproofing layer,

!- 3rd pass waterproofing layer (according to construction requirements.)

Carry out multiple spraying) - waterproofing - paving asphalt concrete construction process

1. Before construction, the brown brush and hair brush should be fully soaked to make it soft and smooth.

2. Construction shall not be carried out when the temperature is below 0 °C or above 35 °C (high temperature construction should be avoided)

3. The storage and transportation temperature is 5°C-35'°C.

4. Construction should be selected in rain-free weather within 4 hours.

5. Before the coating film is not dried or paved with asphalt, it is strictly forbidden to step on and exercise by car. 6. Rinse with water immediately after the construction tools are used up

for reuse.

(Reference Dosage】

THE AMOUNT OF 1.0MM THICK COATING FILM IS ABOUT: 1.3-1.5KG/M2