PRODUCT
‹
›
‹
›
Reaction bonding synthetic polymer waterproofing membrane ·
【Product Introduction】
Reaction bonding polymer waterproofing membrane is a composite of polymer sheet and self-adhesive membrane, which has the advantages of two waterproof materials, which greatly improves the performance of puncture resistance, weather resistance, self-healing, high and low temperature resistance, better physical properties and more stable chemical properties.
【Scope of application】
◆ Waterproof and impermeable of various underground projects, such as basements, civil air defense projects, subway and other waterproof projects.
◆ Waterproofing of roofs and exterior walls of industrial and civil buildings.
◆ Waterproofing of underground garage roof planting and greening and roof garden
【Product Advantages】
1. Super adhesion: reactive adhesive waterproofing membrane, can be bonded with the concrete base through chemical cross-linking and physical mortise and tenon synergy, the bond is firm and durable, irreversible, and the bonding strength is much greater than that of the general physical bonding membrane.
2. High strength and high elongation: the surface structure is Verolone strong film, using cross technology, high strength and high toughness, the strength is much larger than that of ordinary film, and the elongation is more than 3 times that of PET film.
3. Excellent dimensional stability and no shrinkage: the strong cross-stacked pressure film of the surface structure of Verorant has uniform longitudinal and horizontal deformation, and will not shrink due to large changes in construction temperature.
4. Strong impact resistance and puncture resistance: Due to the waterproof construction process, the waterproof surface is subjected to external factors such as iron pickaxe scratching and heavy falling objects, and the waterproof membrane can effectively resist the impact of these accidents
5. Excellent nail shaft watertightness: The waterproof membrane has very excellent creep performance, has a good coating effect on nails and other sharp objects, and can seal and heal the small damage caused by construction damage.
6. Excellent anti-aging performance: The surface structure is a strong film of Veroline, which has excellent weather resistance, corrosion and aging functions against environmental factors such as acid, alkali and salt.
【Construction technology】
Base surface cleaning > > Configure cement slurry > > elastic baseline test paving > > tear off the bottom of the coil separator paper > > coil paving
>> Roll Pressing and Exhaust > > Lap Edge Banding, End Sealing > > Finished product maintenance and protection
SIMILAR PECOMMENDED
Planting roofing resistant root puncture waterproofing membranePlanting roof root puncture resistant waterproofing membrane refers to a waterproof material used in engineering waterproof construction. One of the polyvinyl chloride double-sided composite root-puncture-resistant waterproofing membranes for planting roofs uses copper tire base as a root-resistant waterproof layer, which has long-term resistance to plant root (or rhizome) puncture performance, strong adhesion, good stability, low-temperature flexibility and good heat resistance, chemical corrosion resistance and radiation resistance, and still shows good root-blocking and waterproof performance for more than 20 years.
【Scope of application】
SBS modified asphalt waterproof membraneSBS modified asphalt waterproofing membrane, this membrane has good high temperature resistance, can be used in the temperature range of -25 to +100 °C degrees, has high elasticity and fatigue resistance, as well as up to 150% elongation and strong puncture resistance, tear resistance. It is suitable for waterproofing projects in cold areas, as well as industrial and civil buildings with large deformation and vibration.
Self-adhesive polymer modified asphalt waterproofing membrane Specification：1.2mm/1.5mm / 2.0mm /3.0mm / 4.0mmSelf-adhesive polymer modified asphalt waterproofing membrane is a kind of self-adhesive waterproofing membrane made of polyester felt as the tire base, coated with elastomer (SBS) modified asphalt on both sides, covered with polyethylene film, fine sand or mineral granules and other isolation materials on the upper surface, coated with self-adhesive rubber asphalt on the lower surface, and attached with peelable silicon-coated separator film or silicon-coated wrinkle isolation paper as an isolation material. The product is suitable for waterproofing projects of Class I and II buildings.
Reaction bonding synthetic polymer waterproofing membraneReaction bonding polymer waterproofing membrane is a composite of polymer sheet and self-adhesive membrane, which has the advantages of two waterproof materials.
MESSAGE
It's better to leave your contact information, let's have a chat!