Sound-absorbing and noise-reducing coatings
In general, the noise of buildings mainly comes from two forms: impact sound and air sound, and the noise generated by impact mainly vibrates through collision with the floor slab and then spreads from the air to the surrounding area. Therefore, in particular, the impact noise of places such as bars, KTVs, and crowded stadiums will be more serious. The sound-absorbing and noise-reducing coating can be sprayed on the roof, which can well reduce the vibration and thus reduce the impact sound, which is also a new sound-absorbing material to solve the noise of the building floor.

概要


一般建筑的噪音主要来自撞击声和空气声这两种形式,而由撞击产生的噪音主要通过与楼板碰撞产生了振动再由空气向四周传播。所以特别是像酒吧、KTV以及人群密集的体育馆等这类场所的撞击噪音就会更加严重。而吸音降噪涂料可进行顶板喷涂能够很好地减弱振动从而降低撞击声,这也是为了解决建筑楼板噪音的新型吸音材料。


主要特点






1.吸音涂料施工方便、喷涂方式可以跟常规涂料一样操作、简单易操作、室内外均可施工。
2.可以长久使用、开封搅拌均匀即可,施工简便,防虫,防蟑蛆,蚂蚁、白蚁等在吸音喷涂产品中无法生存。
3.粘结牢固、无接缝、耐久、美观、防水、防火、防霉防潮、耐腐蚀、防结露、不易老化 以及有良好的吸音隔音性能。
4.吸音降噪涂料除了具有卓越的降噪吸音效果外,还是较好的防火保温材 料,有较好的阻燃性能。


 



适用范围


适用于室内外建筑等的表面:一般住宅小区、路边住宅、隧道、道路隔音屏障、酒店、学校、体育馆、音乐厅、歌剧院、工厂等室内外墙体和楼层板隔音



技术指标





施工方法


1.把基面清理干净,并应平整结实,无空鼓,确保基面干燥无明水。
2.喷涂吸音涂料,待表面干透后,即可进行后续施工
3.根据不同场景所需隔音厚度,多遍涂刷(前一遍表面干燥后才能进行下一遍涂刷)。
4.参考用量0.7kg/m2 涂膜厚度1mm,施工时单层厚度建议不能超过1.5mm。


储运与包装




注意事项



1.使用前可以先搅拌均匀,避免有沉淀物,施工时单层厚度建议不超过1.5mm;
2.施工前基面尘土、污垢、锈粉等异物应清理干净;
3.周围的环境的温度应在5℃以上,相对湿度在85%以下;
4.避免多雨时节施工,施工期间雨水应遮挡;



SIMILAR PECOMMENDED
  • 11.png
  • 455.png

MESSAGE

It's better to leave your contact information, let's have a chat!

SEND