Product Introduction】

This product is a high-performance, inorganic, alkali-free, waterproof, moisture-proof, anti-crack, anti-seepage, leakage plugging in one of the latest high-tech products.

Used for waterproof engineering, with water pressure, immediately stop leakage, this product is simple to operate, only add water to mix can be used, non-toxic, harmless, non-polluting,

Same life as a building.

Scope of application)

It is used for all kinds of masonry, concrete structure base surface of the new and old buildings of a large amount of water leakage point, surface rapid plugging and water stopping, waterproof

Plastering can be plugged and plastered for construction, which can reflect the excellent performance of rapid plugging and water stopping.

【Product Advantages】

1. Fast condensation and hardening, rapid development of strength, and effective resistance to water pressure.

2. Plugging leakage with water belt pressure, instantaneous water stopping, and facing the back of the water for construction, simple and convenient.

3. Good workability and cohesion, easy to plaster the surface of a large area.

4. It has micro-expansion, good impermeability, strong adhesion, complete and firm combination with the base surface.

5. Non-toxic, harmless, non-aging, no pollution to water quality and surrounding environment.

Construction technology】

Clean the base layer, remove loose surfaces, and fill the cracks and depressions in the base layer with cement or waterproof glue.

According to the amount of the project, take a small amount of powder, add water according to the ratio of powder: water = 10:1-3, quickly stir evenly and knead into a mass and wait for quick coagulation

When it is fixed, quickly press into the cleaned and clean leaky cavity, press for 3-5 minutes, and scrape twice on the flexibility if necessary

Waterproofing slurry.

(Notes】

The temperature during construction should be between 5 °C and 35 °C, and outdoor construction is prohibited in windy or rainy and snowy weather;

2、

The prepared paint should be used within 2 hours;

The powder that has not been used up after opening should be stored tightly;

3.

4. Do not splash the paint into the eyes, if there is one, rinse with water in time, and those who are unwell should seek medical attention immediately