Product Introduction】

This product is a polymer-modified cementitious waterproofing material formulated from a unique formula. The introduction of United States technology, the use of permeable crystalline material to the penetration mechanism of concrete, is the base surface to form an integral consistent integrated composite waterproof material with double waterproof function. Brushing on the desired part can penetrate the inside of the substrate to form branch-like crystals, blocking the passage of water molecules in the structure, thus achieving a waterproof effect.

【Scope of application】

It can be used for indoor and outdoor waterproofing projects of various building structures such as concrete, brick walls, concrete blocks, prefabricated blocks, etc., such as: subway stations, mines, tunnels, elevator shafts, basements, kitchens, toilets, bathrooms, pools, swimming pools, domestic sewage pools, etc

【Product Advantages】

1. The active ingredient in the slurry can penetrate into the capillary pores in the cement substrate, micro-cracks and produce chemical reactions, and penetrate into the inner part of the substrate to form a dense waterproof layer crystal;

2. It can cover hair-like cracks (less than 0.4 mm) to resist and slight shocks;

3. It can be constructed on a wet base surface, and subsequent processes such as ceramic tiles can be directly pasted without making a mortar protective layer;

4. The crystalline body penetrates deep into the pores of the substrate, with high impermeability and compressive strength, and has the waterproof function of negative water surface;

5. Non-toxic, harmless, can be directly used in drinking pools and fish ponds; The coating has the effect of depressing the growth of mold and prevents the contamination of the finish by moisture salts.

【Construction technology】

1. Clean the base surface, ensure that the base surface is smooth and free of pollution, and moisten the base surface, but there can be no open water;

2.JS mix with cement 1:1 and stir evenly; Intermittent stirring should be maintained during use to prevent precipitation;                     3. Layered construction, the painting direction of the second layer should be perpendicular to the first layer, and the thickness of each layer shall not exceed 1mm;

【Reference Dosage】

ABOUT 1KG/1.5M2, THE ACTUAL AMOUNT VARIES DEPENDING ON THE WATER ABSORPTION OF THE SUBSTRATE AND THE INFLUENCE OF VARIOUS FACTORS IN THE CONSTRUCTION.

技术指标

序 号	检验项目	标准要求	检验结果	单项判定
1	固体含量	≥70%	78	合格
2	拉伸强度	无处理≥1.8MPa	2.1MPa	合格
		加热处理后保持率≥80%	90%	合格
		碱处理后保持率≥70%	85%	合格
3	断裂伸长率	无处理≥30%	35%	合格
		加热处理≥20%	28%	合格
		碱处理≥20%	25%	合格
4	不透水性	0.3MPa,30min不透水	不透水	合格
5	粘结强度（无处理）	≥1.0MPa	2.5MPa	合格