Premium tile adhesive
Special grade tile adhesive belongs to the national design institute to promote new materials, belongs to green building materials products. Tile adhesive, also known as tile adhesive or binder, viscose and other names, is a new type of material for modern decoration, replacing the traditional cement yellow sand, the adhesive force is several times that of cement mortar, can effectively paste large ceramic tiles and stones, to avoid the risk of falling bricks. Good flexibility to prevent hollowing in the production of drums. This product is a polymer-modified cementitious tile adhesive, which is divided into strong type 1 (ordinary type) and strong type 2 (super strong)

【Product Introduction】

Special grade tile adhesive belongs to the National Design Institute to promote new materials, non-toxic and harmless, belongs to green building materials products. Tile adhesive, also known as porcelain tile adhesive or binder, adhesive and other names, is a new type of material for modern decoration, replacing the traditional cement yellow sand, adhesive is several times that of cement mortar, can effectively paste large ceramic tiles and stones, to avoid the risk of falling bricks. Good flexibility to prevent hollowing out of the production drum. This product is a polymer-modified cementitious tile adhesive, which is divided into strong type 1 (ordinary type) and strong type 2 (super strong)


【Scope of application】

It is mainly used for pasting decorative materials such as tiles, surface tiles, floor tiles, etc., and is widely used in interior and exterior walls, floors, bathrooms, kitchens and other building decoration places.

【Product Advantages】

1. Strong adhesion, material saving, safety and firmness, to avoid hollowing or falling off.

2. There is no need to soak bricks in the construction, which can significantly improve the work efficiency, convenience and speed.

3. It has good impermeability and anti-aging performance.

4. Elastic, which can absorb the expansion and contraction between the substrate and the tile, thereby prolonging the service life of the tile.

【Construction technology】

1. Pay attention to slowly pour the powder into the water while stirring, and stir the tile glue and water into a uniform paste form according to about 4:1, and the electric stirring effect is the best. If the paste is left to stand for 10 minutes, then stir it again to increase the strength.

2. Use the toothed scraper to apply the glue on the working surface to make it evenly distributed, adjust the angle between the scraper and the working surface to control the thickness of the glue, about 1m each time, and then knead the tile on it.

【Reference Dosage】

1.5kg/m2



技术指标



序 号检验项目标准要求检验结果单项判定
1拉伸粘结强度,MPa≥11.3合格
2浸水后拉伸粘结强度/MPa≥11.1合格
3热老化后拉伸粘结强度/MPa≥11.2合格
4冻融循环后拉伸粘结强度/MPa≥11.1合格
5晾置时间≥20min,拉伸粘结强度/MPa≥0.50.8合格







SIMILAR PECOMMENDED
  • 11.png
  • 455.png

MESSAGE

It's better to leave your contact information, let's have a chat!

SEND