【Product Introduction】

This product is an organic coating composed of a variety of additives with high-quality modified acrylic acid co-emulsion, and then high-alumina high-iron iron cement and more

The inorganic powder composed of a kind of filler is a two-component water-based waterproof coating processed by scientific formulation. Non-toxic and environmentally friendly, resistant to high

Suppressive pressure, with negative water surface waterproof function, can be constructed on wet base surface, good wear resistance, good adhesion, can be used in drinking water pools, etc.

Scope of application】

It is most suitable for waterproof, seepage-proof and moisture-proof of toilets, kitchens, floors, balconies and other projects, and can be used for concrete and brick walls.

Indoor and outdoor waterproofing works for various building structures such as concrete blocks and prefabricated blocks.

Benefits】

1. Resist high hydrostatic pressure, with the waterproof function of negative water surface; Can be applied in wet areas; Easy to operate, just stir on site

Mix and use;

2. Good abrasion resistance, good adhesion, suitable tile adhesive can be used to paste various decorative tiles after drying; Good breathability;

3. Non-toxic, harmless, can be used in pools and fish ponds, etc.;

【Base Preparation】

1. The substrate must be firm, smooth and clean, free of dust, greasy, wax, release agent and other debris substances;

2. All small pores and sand holes can be smoothed by plugging king; Before applying the slurry, the substrate should be thoroughly moistened beforehand, but there should be no standing water.

Construction technology】

Pour the powder into a container with additives, mechanically stir for 3 minutes until there is no precipitated colloid, then let it stand for 3-5 minutes, and then stir again

Mix and serve. Intermittent agitation should be maintained during use to prevent precipitation. Use a stiff-bristled brush, roller, or sprayer

Evenly brush or spray the mixture on a damp substrate; For layered construction, the painting direction of the second layer should be perpendicular to the first layer,

The thickness of each layer must not exceed 1mm. The time interval for the construction of each floor shall not be less than 4 hours

(Reference Dosage)

ABOUT 1.5KG/M2, THE ACTUAL DOSAGE VARIES DEPENDING ON THE WATER ABSORPTION OF THE SUBSTRATE AND THE INFLUENCE OF VARIOUS FACTORS IN CONSTRUCTION.