【Product Introduction】

Tile back coating glue (i.e. brush and paste) is widely used in old wall renovation, pasting tiles, vitrified tiles, glass mosaics, marble, etc., and can also be used for new building concrete surface repair and painting. This kind of back coating glue has strong permeability, can decompose the release oil remaining on the surface of the concrete, and the back coating glue of the strong ceramic tile can ensure that the tile does not fall off, and the painting is not hollow, which is an ideal material that is both environmentally friendly and waterproof, it has low cost, simple painting method, close to life, close to reality.

【Scope of application】

It is suitable for coating the back of glazed bricks, full-body bricks, polished bricks, vitrified bricks, anti-slip bricks, ancient building bricks, mosaics, marble, granite, limestone, slate and other high-density masonry

【Product Advantages】

1. This product is non-combustible, does not contain volatile substances, is non-toxic, tasteless and pollution-free, and is a green and environmentally friendly product.

2. The tile adhesive with nano-level ultra-fine particles penetrates and solidifies into a permanent and firm mesh anchor bond layer after being brushed with the back of the masonry and the base layer.

3. Painting this product on the back of masonry and the bonding base can improve the bonding strength by more than 4.5 times, effectively eliminating the quality defects such as hollowing and falling off of the inlay finish, binder and bonding base.

4. Tile paste has good water resistance, air permeability, weather resistance and excellent alkali resistance and anti-aging performance, so the back of the masonry does not need to be coated with protective agent for waterproof and alkali resistance.

5. It can be constructed and hardened in a humid environment, and the construction is simple and fast, saving labor and materials

【Construction technology】

The surface of the base should be solid, no floating dust, no oil stains, directly painted on the back of the tile, and the tile bonding construction can be carried out after drying.

Theoretically, 1kg of ceramic tile back glue can be painted about 14 square meters, and the actual amount varies depending on the water absorption of the substrate and the influence of various factors in the construction.

【Precautions】

1. Long-term storage will have stratification and mildew phenomenon, stir evenly and dilute with water before use, and it will not affect the use effect.

2. The construction should be carried out in strict accordance with the specified proportion, the painting should be uniform, other materials and admixtures should not be added, and the slurry should be used up within 2 hours without leakage and flow.

3. The operating environment temperature should be between 5°C ~ 40°C.