‹
›
‹
›
【Product Introduction】
● Polyurea topcoat is an active solvent coating, two-component, hand-brushed polyurea ductile material, which is formed by bonding raw materials such as semi-prepolymer, amine-terminal polyether, and time-delay diamine chain extender.
【Scope of application】
It is suitable for all concrete surfaces, metal tanks and internal and external surfaces of pipelines of national key engineering projects, and has been widely used in urban subways, high-speed railways, tunnels and bridges, water conservancy and electromechanical, petrochemical, marine drilling, military and civilian dual-use and other engineering fields.
【Product Features】
● 1. Rapid curing, gel, 3~4 hours of rapid film formation, continuous spraying of the façade without sagging
2. The coating is dense, continuous, smooth, no joints, and has superior waterproof and anti-corrosion properties
3. Strong thermal stability, can be -50~150°C short-term temperature impact
4. Excellent physical properties, good strength, high elongation, good flame resistance and flame retardant, low fire spread rate, and self-extinguishing 5. Good weather resistance (referring to aliphatic), no chalking, no cracking, no falling off for long-term outdoor use
【Construction technology】
● Construction base requirements: the base surface should be kept flat, free of dust, and open water before construction
Mix the AB material in strict accordance with the 1:1 mass ratio and stir evenly, usually stirring for 5-10 minutes, and use it with a scraper or roller. AB material mixing needs to be completed within 1 hour. The surface drying time of the material is 2 hours, and the drying time is 12 hours.
Reference dosage: 0.4KG per square roller coating, the recommended dosage
Epoxy primerThis product is an integrated composite waterproof material with double waterproof function that uses the permeable crystalline material of permeable crystalline material, combined with the unique adhesion and water retention of polymer emulsion and concrete and cement mortar base to form a permeable crystallization effect on the concrete capillary pores and the overall formation of the base surface.
Reaction bonding synthetic polymer waterproofing membrane ·
【Product Introduction】
Reaction bonding polymer waterproofing membrane is a composite of polymer sheet and self-adhesive membrane, which has the advantages of two waterproof materials, which greatly improves the performance of puncture resistance, weather resistance, self-healing, high and low temperature resistance, better physical properties and more stable chemical properties.
【Scope of application】
◆ Waterproof and impermeable of various underground projects, such as basements, civil air defense projects, subway and other waterproof projects.
◆ Waterproofing of roofs and exterior walls of industrial and civil buildings.
◆ Waterproofing of underground garage roof planting and greening and roof garden
【Product Advantages】
1. Super adhesion: reactive adhesive waterproofing membrane, can be bonded with the concrete base through chemical cross-linking and physical mortise and tenon synergy, the bond is firm and durable, irreversible, and the bonding strength is much greater than that of the general physical bonding membrane.
2. High strength and high elongation: the surface structure is Verolone strong film, using cross technology, high strength and high toughness, the strength is much larger than that of ordinary film, and the elongation is more than 3 times that of PET film.
3. Excellent dimensional stability and no shrinkage: the strong cross-stacked pressure film of the surface structure of Verorant has uniform longitudinal and horizontal deformation, and will not shrink due to large changes in construction temperature.
4. Strong impact resistance and puncture resistance: Due to the waterproof construction process, the waterproof surface is subjected to external factors such as iron pickaxe scratching and heavy falling objects, and the waterproof membrane can effectively resist the impact of these accidents
5. Excellent nail shaft watertightness: The waterproof membrane has very excellent creep performance, has a good coating effect on nails and other sharp objects, and can seal and heal the small damage caused by construction damage.
6. Excellent anti-aging performance: The surface structure is a strong film of Veroline, which has excellent weather resistance, corrosion and aging functions against environmental factors such as acid, alkali and salt.
【Construction technology】
Base surface cleaning > > Configure cement slurry > > elastic baseline test paving > > tear off the bottom of the coil separator paper > > coil paving
>> Roll Pressing and Exhaust > > Lap Edge Banding, End Sealing > > Finished product maintenance and protection
Planting roofing resistant root puncture waterproofing membranePlanting roof root puncture resistant waterproofing membrane refers to a waterproof material used in engineering waterproof construction. One of the polyvinyl chloride double-sided composite root-puncture-resistant waterproofing membranes for planting roofs uses copper tire base as a root-resistant waterproof layer, which has long-term resistance to plant root (or rhizome) puncture performance, strong adhesion, good stability, low-temperature flexibility and good heat resistance, chemical corrosion resistance and radiation resistance, and still shows good root-blocking and waterproof performance for more than 20 years.
【Scope of application】
SBS modified asphalt waterproof membraneSBS modified asphalt waterproofing membrane, this membrane has good high temperature resistance, can be used in the temperature range of -25 to +100 °C degrees, has high elasticity and fatigue resistance, as well as up to 150% elongation and strong puncture resistance, tear resistance. It is suitable for waterproofing projects in cold areas, as well as industrial and civil buildings with large deformation and vibration.
MESSAGE
It's better to leave your contact information, let's have a chat!