【Product Introduction】

DPS perpetual setting fluid is an environmentally friendly, colorless, odorless, safe and simple to use concrete protective agent. Catalytic junction according to the active substance

The mechanism of crystal reaction directly loads the catalytic active additives on a variety of modified natural materials, which is green and environmentally friendly, and will not be harmful to people

and adverse effects on the environment. It can penetrate below the surface of the concrete and react chemically with the alkaline substances in the concrete.

This reaction produces a composite silica eutectic in the pores as well as in the capillary pores, which permanently seals the concrete and strengthens the old and the new

The strength and hardness of the coagulant and provide good air permeability for the coagulant.

DPS is not a simple concrete waterproofing agent, but a comprehensive concrete protector.

【Scope of application】

concrete floors or walls; Tunnel; Bridge deck; concrete flooring of stairs and balconies, bathroom walls and floors; cesspools and municipal works;

Drinking water pool tower, granary moisture-proof, etc.

【Product Advantages】

1. It is a kind of coating that is practical and only needs to be applied to the surface of concrete and cement once, and the anti-leakage degree is strong, more effective and more durable

Durable and easier to apply.

2. It can increase and enhance the density and hardness of concrete and cement surface, so that the surface layer of concrete and cement can be uniformly cured and prevent hair

Radial cracks, fine cracks and localized drying, and do not alter and affect the paint color, quality and structure of concrete and cement-treated surfaces,

3. In addition to being a protective layer on the surface of concrete, it can also enhance and protect paint, cement walls, bricks, floor tiles and

The cohesion of concrete makes it easier to remove frost from the concrete and cement surfaces, and at the same time reduces the formation or melting of concrete and cement surfaces

Damage caused by snow.

4. It is a product with excellent polymerization effect, which can prevent the generation of bacteria and mold and prevent the growth of moss.

5. Efficient, non-toxic, colorless and odorless permeable anti-leakage products, and can be used without mixing or adding other raw materials, and does not burn

Meets United States national environmental standards

【Construction technology)

1. Do not dilute or mix DPS with other liquids. Spray directly with the stock solution and shake the solution well (at least 1 minute) before use

until foamy. If the solution is frozen, it will be used after it is completely melted, and the material properties will not be affected.

2. Use a brush, cyanine

Roller brushes or large and medium-sized low-pressure sprayers are preferable. It should be ensured to apply evenly so that the surface DPS is saturated. For the penalty

For straight walls, apply DPS from the heel of the wall upwards to ensure that the application is even. It should be sprayed carefully to prevent omissions.