JRK three-in-one waterproof and anticorrosive coating is a waterproof material specially used in pools, which is used for sewage treatment

Heavier than moderate anti-corrosion, such as: sewage plants, fire pools, ice storage, chemical pools are good choices, the company's three prevention and one defense

Each process of corrosion materials has a technician sampling inspection, layer by layer checks, excellence, so that every way, every item is qualified, square

Can be shipped.

【Scope of application】

1. It is mainly suitable for anti-corrosion and waterproof protection of industrial and domestic sewage treatment plants, water plants, landfills and water pipelines

2. Waterproofing of all parts of underground construction projects, such as internal and external walls, retaining walls, etc.;

3. Excellent air insulation, bonding and thermal insulation and other environmentally friendly materials for cold storage;

4. Water conveyance and storage buildings, such as waterproof and anti-corrosion works of sewage treatment tanks;

5. Roofs, window sills, toilets, floors, interior and exterior walls of various buildings;

6. Construction cracks, cracks, wall pipes, downspouts, etc.

Features】

1. Convenient construction: the product is a two-component, no other materials need to be added for construction, and it can be painted, sprayed or rolled

2. It can penetrate into the substrate, firmly adhere to the substrate, and have good waterproof, moisture-proof, anti-corrosion and anti-permeability.

3. Resist high hydrostatic pressure and have the waterproof function of negative water surface; Can be applied in wet areas; Easy to operate, just stir on site

ready to use; Good abrasion resistance and good adhesion.

4. This product is non-toxic and non-polluting, high corrosion resistance, can be constructed on the wet and dry surface of concrete, and the coating after construction can resist the micro-cracking of concrete

The corrosion and water leakage caused by the grain are convenient for construction, good weather resistance and strong adhesion

【Construction technology】

Pour the powder into a container containing additives, mechanically stir for 3 minutes until there is no precipitated colloid, and then let it stand for 3~5 minutes, and then

Stir and serve. Use a stiff brush, roller or spraying machine to evenly brush or spray the mixture on a damp substrate;

For layered construction, the painting direction of the second layer should be perpendicular to the first layer; The thickness of each layer must not exceed 1mm. 2. Pay attention when brushing

When brushing for the first time, the strength should be even, do not miss the brush, and should not be too thick to prevent cracks after drying; Keep the front and back sides intersecting vertically when painting

angled to fully cover in place