Color K11 flexible waterproof coating
This product is a polymer-modified cementitious waterproofing material formulated from a unique formula. It is a two-component slurry, which is obtained after mixing the powder and additives evenly according to the mix ratio, and brushing it on the required parts, which can penetrate into the base material to form a branch-like crystal, and cut off the water molecule channel in the structure, so as to have a waterproof effect.


【Product Introduction】

● This product is a polymer modified cement-based waterproofing material prepared by a unique formula. It is a two-component slurry, according to the mix ratio of the powder and additives evenly mixed to obtain the slurry, painted in the required parts, can penetrate into the base material to form a branch-like crystal, cut off the water molecule channel in the structure, so as to play a waterproof effect.

【Scope of application】

It can be used for indoor and outdoor waterproofing projects of various building structures such as concrete, brick walls, concrete blocks, prefabricated blocks, etc., such as: subway stations, mines, tunnels, elevator shafts, basements, kitchens, toilets, bathrooms, pools, swimming pools, domestic sewage pools, etc.

【Product Advantages】

* Resist high hydrostatic pressure, with waterproof function of negative water surface; Can be applied in wet areas; Easy to operate, only need to mix and stir on site to use;

* Good abrasion resistance, good adhesion, suitable for tile adhesive pasting various decorative tiles after dry solidification;

* It has good air permeability;

* Strong flexibility, wear-resistant and water-resistant, suitable for waterproof swimming pools, pools and fish ponds;

【Construction technology】

● 1. Pour the powder into a container containing additives, stir mechanically for 3 minutes until there is no precipitated colloid, then let it stand for 3 ~ 5 minutes, and then stir it again to use. Intermittent stirring should be maintained during use to prevent precipitation.

2. Use a stiff brush, roller or spraying machine to evenly coat or spray the mixture on a damp substrate;

3. For layered construction, the painting direction of the second layer should be perpendicular to the first layer; The thickness of each layer must not exceed 1mm.

【Precautions】


The construction temperature should be 5°C to 35°C;   The slurry after adjustment is used up within 1 hour; Before the construction of cement calendered base surface, need to re-draw the base surface first; It is recommended to use tile adhesive for laying tiles on the waterproof layer;





SIMILAR PECOMMENDED
  • 11.png
  • 455.png

MESSAGE

It's better to leave your contact information, let's have a chat!

SEND