‹
›
‹
›
【Product Introduction】
Baishiju large slab tile brushed high viscosity back glue, using the main raw materials of BASF in Germany, selected a variety of imported additives, fillers developed, can penetrate into the surface of vitrified brick wax powder, and cement mortar reaction to achieve the effect of firm bonding, to eliminate the phenomenon of brick hollowing.
【Scope of application】
It is used as a reinforcement aid for pasting vitrified tiles, thin slab tiles, large slab tiles and large slate tiles.
【 Advantages 】
●Brushed adhesive backing fully occludes with the three-dimensional shape of the adhesive mortar.
●Super bonding, the bonding strength can reach 1 times or more than that of the conventional adhesive, to ensure that the bonding is firm and does not fall off the bricks.
【Construction technology】
Base surface treatment: The surface of the base layer should be solid, no floating dust, no film powder, and no oil stain.
How to Use:
Use a brushing roller to directly roll on the back of the tile to dry and then paste, smeared with cement adhesive mortar
Or tile adhesive for tile paste construction, cement bonding mortar requires the use of cement for the national standard P.O42.5R ordinary Portland cement, cement and fine sand, tile adhesive mixing ratio: 50:50:1.
The active ingredient in the ingredient can react with the cement mortar, which can significantly improve the paste effect, and it is recommended to apply and paste it immediately.
【Reference Dosage】
The amount of vitrified brick on the back is about 0.35kg/㎡.
【Precautions】
●It cannot be constructed below 5 °C or in the rain, and it is not allowed to use cement slurry to paste tiles directly.
● After the adhesive is painted on the back of the tile, it must be completely dried before tiling, and the tile can not be pasted in the semi-dry state of the binder, so as not to affect the tiling effect.
●Outdoor environment must be used with caution,
●It has a better effect of tiling with Baishiju tile adhesive to prevent the phenomenon of falling bricks.
●It is not allowed to paste large tiles of 750mmx1500mm or more.时：黄， ， 了解更多信息 ij
Strong tile back coating glue (slow sticking type)The strong ceramic tile back coating adhesive is a white latex composed of a polymer emulsion and a special auxiliary. It can effectively help solve the problem of hollow drum falling off of traditional cement mortar adhesive with low water absorption and smooth substrates such as vitrified bricks and stones. It improves the mechanical strength of the system and the safety of the project, and prolongs the service life of the building.- Strong tile back glue (brush and stick)Tile back coating glue (i.e. brush and paste) is widely used for old wall renovation, pasting tiles, vitrified tiles, glass mosaics, marble, etc., and can also be used for new building concrete surface repair and painting. This kind of back coating glue has strong permeability, can decompose the release oil remaining on the surface of the concrete, and the back coating glue of the strong ceramic tile can ensure that the tile does not fall off, and the painting is not hollow, which is an ideal material that is both environmentally friendly and waterproof, it has low cost, simple painting method, close to life, close to reality.
Strong mortar glue (Gray)Mortar glue", also known as "concentrated super strong cement mortar improver", is a new material used to solve the problems of poor bonding, hollowing, cracking, falling off, and unstable performance of facing bricks when paved with ordinary cement mortar. This product has strong viscosity, good water retention, green environmental protection, convenient construction, and eliminates building shortcomings such as shelling and cracking.
Colored anti-mildew caulk (White, Black (Modulable Color)Color waterproof and mildew resistant caulk is for the brick joint treatment of facing bricks in high-rise buildings or thermal insulation systems to improve the overall waterproofness and decoration of the facing layer. The variety of colors completes the decorative effect of the veneer. It has the function of waterproof and mildew-proof, so that the finish is hygienic and clean. It can reduce the phenomenon of anti-slurry and hanging tears to pollute the finish.
MESSAGE
It's better to leave your contact information, let's have a chat!