Strong tile back coating glue (slow sticking type)
The strong ceramic tile back coating adhesive is a white latex composed of a polymer emulsion and a special auxiliary. It can effectively help solve the problem of hollow drum falling off of traditional cement mortar adhesive with low water absorption and smooth substrates such as vitrified bricks and stones. It improves the mechanical strength of the system and the safety of the project, and prolongs the service life of the building.


【Product Introduction】

The strong ceramic tile back coating adhesive is a white latex composed of a polymer emulsion and a special auxiliary. It can effectively help solve the problem of hollow drum falling off of traditional cement mortar adhesive with low water absorption and smooth substrates such as vitrified bricks and stones. It improves the mechanical strength of the system and the safety of the project, and prolongs the service life of the building.


【Scope of application】

It is suitable for coating the back of glazed bricks, full-body bricks, polished bricks, vitrified bricks, anti-slip bricks, ancient building bricks, mosaics, marble, granite, limestone, slate and other high-density masonry

【Product Advantages】

1. This product is non-combustible, does not contain volatile substances, is non-toxic, tasteless and pollution-free, and is a green and environmentally friendly product.

2. The tile adhesive with nano-level ultra-fine particles penetrates and solidifies into a permanent and firm mesh anchor bond layer after being brushed with the back of the masonry and the base layer.

3. Painting this product on the back of masonry and the bonding base can improve the bonding strength by more than 4.5 times, effectively eliminating the quality defects such as hollowing and falling off of the inlay finish, binder and bonding base.

4. Tile paste has good water resistance, air permeability, weather resistance and excellent alkali resistance and anti-aging performance, so the back of the masonry does not need to be coated with protective agent for waterproof and alkali resistance.

5. It can be constructed and hardened in a humid environment, and the construction is simple and fast, saving labor and materials

【Reference Dosage】

Theoretically, 1kg of ceramic tile back glue can be painted about 14 square meters, and the actual amount varies depending on the water absorption of the substrate and the influence of various factors in the construction.

【Precautions】

1. Long-term storage will have stratification and mildew phenomenon, stir evenly and dilute with water before use, and it will not affect the use effect.

2. The construction should be carried out in strict accordance with the specified proportion, the painting should be uniform, other materials and admixtures should not be added, and the slurry should be used up within 2 hours without leakage and flow.

3. The operating environment temperature should be between 5°C ~ 40°C.


For more information, please visit the official website of Baishiju www.58baishiju.com






SIMILAR PECOMMENDED
  • 11.png
  • 455.png

MESSAGE

It's better to leave your contact information, let's have a chat!

SEND