【Product Introduction】

Tile adhesive (for large slabs, two-component) is a high-performance anti-detachment treatment agent with strong adhesion. Environmentally friendly profiles for reinforcing agents. It is a two-component product, the powder is mixed with high-quality cement, refined sand and modifier, and the liquid is composed of polymer emulsion and additives. After the penetration and solidification of the mortar of this material, it strengthens the substrate and improves the bonding strength of the concrete mortar, and also has a certain flexibility, which can solve the problems of thermal expansion and cold contraction after tiling and hollowing, delamination and brick dropping.

【Scope of application】

It is suitable for interface pretreatment of vitrified bricks, imitation stone bricks, marble, granite and other low-water absorption;

It is suitable for back coating treatment and paving of various ceramic tiles and natural stones such as large slabs and rock slabs.

【Product Advantages】

1. Efficient batch scraping, easy construction;

2. Good adhesion and firm bonding;

3. Flexible and crack resistant, green and environmentally friendly.

【Construction technology】

● 1. The back of the tile should be clean, free of oil, free of impurities such as release agent;

2. For material preparation, first put the liquid material in the barrel, stir and add powder at the same time to stir until it is uniform and free of agglomeration before it can be used, and the material needs to be used up within 4 hours;   3. Smear the base surface with cement mortar, and use a spatula to scrape the glue directly and evenly on the pretreated base surface (such as the back of the tile) to make it evenly distributed, and bond it immediately when the glue is not dry.

【Reference Dosage】

1kg can brush 1.5~2 squares

【Precautions】

● 1. The back of the tile should be clean, free of oil stains, release agents and other impurities.

2. The cement mortar should be scraped immediately, and the mixed material should be used up within 4 hours, and the dry solid mortar cannot be used.

3. It is forbidden to add water to the material, the scraping area needs to be more than 80%, and outdoor construction is prohibited in rainy and snowy days.

4. The cement used should be more than 325 marks, and it is recommended to leave seams to paste.

了解更多信息欢迎登录佰时居官网     www.58baishiju.com